HINGES / CASEWORK HARDWARE – PULLS
Pulls
TERRY pulls are available with 4” or 96mm mounting hole centers. They are brushed stainless steel or carbon steel with a powder coat finish or dull chrome plating. Pulls use two #8-32 machine screws which are not provided.
Part Number: P604
| Material Diameter: | 5/16” (8mm) |
| On Center Hole Spacing: | 4” (101.6mm) |
| Protrusion: | 1-1/4” (31.8mm) |
| Pack: | 100/case, cell packed |
| Finish: | Chrome plated or powder coat. |
Part Number: P604SS
| Material Diameter: | 5/16” (8mm) |
| On Center Hole Spacing: | 4” (101.6mm) |
| Protrusion: | 1-1/4” (31.8mm) |
| Material | Type 304 stainless steel |
| Pack: | 50/case, cell packed |
Part Number: P4604ERSS
| Material Diameter: | 5/16” (8mm) |
| On Center Hole Spacing: | 4” (101.6mm) |
| Protrusion: | 1-1/4” (31.8mm) |
| Material | Type 304 stainless steel |
| 4” OC mounting holes with longer offset. Handle protrudes 1.44” for greater clearance for ADA applications. |
|
| Pack: | 50/case, cell packed |
Part Number: P605
| Material Diameter: | 5/16” (8mm) |
| On Center Hole Spacing: | 3-25/32” (96mm) |
| Protrusion: | 1-1/4” (31.8mm) |
| Pack: | 100/case, cell packed |
| Finish: | Chrome plated or powder coat. |
Part Number: P605SS
| Material Diameter: | 5/16” (8mm) |
| On Center Hole Spacing: | 3-25/32” (96mm) |
| Protrusion: | 1-1/4” (31.8mm) |
| Material: | Type 304 stainless steel |
| Pack: | 100/case, cell packed |
Warranty
Product Guarantee
Rockford Process Control warrants all Institutional Casework Products shipped to be free of defects in materials and workmanship.
Limited Warranty
Rockford Process Control, Inc. (RPC) warrants its Hinges and hardware against defects in material and workmanship for a period of twelve (12) months from the date of shipment.
RPC will send the original consumer purchaser, without charge, a new RPC Hinge to replace any defective RPC Hinge subject to this warranty. RPC specifically does not warrant removal of the defective Hinge or installation of a new Hinge. This warranty does not cover Hinges that have been incorrectly installed, exposed to excessive loads or abuse in any way. This warranty is a warranty of hardware replacement only. No other warranty is expressed or implied.
Rockford Process Control, LLC
2020 Seventh St, Rockford, IL 61104
815.966.2001 | sales@rockfordprocess.com
Contact Us